ElectronIx
+91 94882 33115Get a Quote
CNC PROGRAM TRANSFER · DNC SOFTWARE FOR FANUC CNCs

Stop walking USB sticks to your machines.

ElectronIx DNC transfers and drip-feeds programs to every CNC on your shop floor — runs headless in the background, handles ~25 machines at once, and installs in one click.

Get a Quote
One-click install. Auto-starts on boot. Ready in minutes.
ElectronIx DNC — ServerONLINE
CNC-04 · VMC
TRANSFERRING
O0420.NCPC → CNC
184,320 / 296,540 bytesXON/XOFF · 62%
CNC-01 · Latheidle · 14 pgms
CNC-02 · VMCidle · 31 pgms
CNC-07 · FTPreceiving CNC→PC
CNC-11 · HMCoffline
Rust-powered engineRuns offline on your LANNo cloud, no subscription lock-inWorks with legacy Fanucs over a cheap converter
SOUND FAMILIAR?

The old way of moving programs is costing you.

✕Operators walk USB sticks from the office PC to every machine.
✕Programs are too big for the CNC's memory — so jobs stall.
✕One PC is tied to each machine, tangled in serial cables.
✕No record of who sent what, when — and which revision is running.
The ElectronIx DNC answer

One lightweight server runs on a single shop-floor PC and talks to every CNC at once. Send and receive programs over the network, drip-feed the ones too big for machine memory, and keep a full audit log of every transfer. No sticks. No tangle. No guessing.

EVERYTHING IT DOES

Built to run your whole floor — quietly, in the background.

≫MARQUEE FEATURE

Drip-feed big programs

Programs too large for CNC memory stream in, flow-controlled with XON/XOFF. Never overruns the buffer — the machine keeps cutting while the file keeps coming.

› streaming O0420.NC → CNC-04
buffer  [████████░░] 78% · XON
sent    231.4 KB / 296.5 KB
rate    9,600 baud · stable
⇄

Two-way transfer

Send PC→CNC and receive CNC→PC. Bulk a whole folder or drip-feed one program.

▦

~25 machines at once

Run dozens of concurrent sessions. One machine failing never touches the others.

↻

Background service

Transfers keep going with no window open. Auto-starts on boot.

⇅

Built-in FTP server

Fanuc-FTP machines dial into the PC. Per-machine login, isolated folder.

≣

Program library

Browse and organise each machine's folder. Built-in file manager + editor.

≡

Full audit log

Every transfer recorded: machine, direction, bytes, result, timestamp.

◐

Accounts + roles

Master vs operator, with gated screens. Operators can't touch setup.

⌁

Remote request

Operator punches O6666 at the control; the right program is found and sent back.

◎

See the handshake

Live XON/XOFF pause and resume. A corrupt receive is named, not guessed at.

%

Fanuc-aware

Handles % framing, O#### numbers, comments, and EOB normalisation correctly.

HOW IT CONNECTS

One PC. Every machine. No new hardware bolted on.

Shop-floor PC
ElectronIx DNC
Ethernet
→
Serial–Ethernet
converter
RS-232
→
CNC (Fanuc)
legacy control
Built-in FTP server
on the same PC
Ethernet (direct)
⇄
Fanuc-FTP machine
no converter needed

No new hardware bolted to the machine — just a cheap Ethernet-serial converter for legacy controls.

01
INSTALL.bat

One-click install. No setup wizard maze.

02

Auto-starts as a service

Runs headless on boot — no one has to remember to launch it.

03

Register & transfer

Add your machines, and start sending. Ready in minutes.

INSIDE THE APP

Nothing moves on your floor that this can't show you.

Real screens from the running software. Pick one — the transfer, the library, the audit trail, or the CNC's own handshake when a line misbehaves.

ElectronIx DNC Quick Transfer screen — drop a CNC program file, pick a machine, and send, drip-feed, or receive

Quick Transfer — Drop a program, pick a machine, hit send — or drip-feed, or receive from the CNC.

WHY ELECTRONIX DNC

Not another grey, bloated legacy tool.

THE OLD WAY
Heavy per-PC install + database serverElectron bloat or aging Win32 UICloud accounts & yearly subscriptionsLocked to one vendor's roadmap
ELECTRONIX DNC
Native app, embedded SQLite — tinyRust engine, fast and memory-safeLocal-first, no cloud, no lock-inOpen, transport-agnostic architecture
LEGACY FANUCS

Works with the machines you already own

A cheap Ethernet-serial converter is all it takes. No new hardware on the machine, no control upgrades.

ROADMAP

Future-proof by design

RS-232 + FTP today; direct serial, OPC UA and MTConnect slot in later without re-engineering the core.

✓
Audit trail
Compliance & traceability for every transfer.
✓
Open architecture
No vendor lock. Add transports later.
✓
Runs offline
Isolated LAN. Nothing leaves the floor.
✓
Auto-restarts
Comes straight back up after a reboot.
PRICING

$99 per machine. One time.

Count your CNCs, multiply by 99. That is the price — published, not quoted. No server licence, no modules, no annual renewal, no surprise add-ons.

3 machines → $297
10 machines → $990
Indian shops are invoiced in rupees with GST. Serial-to-Ethernet converters, where a legacy control needs one, are hardware you buy separately — we'll tell you which.
✓One-time — not a subscription
✓All features included, no modules to add
✓Updates within your version
✓Local install on your PC
✓Support over WhatsApp and email
Not ready to ask for a quote? Run the full product on your own machines first — free, no card, nothing cut out.
Get a Quote
Same-day reply. No sales calls unless you ask.
$99 per machine, one time. Send your machine list and we'll confirm the total and which controls need a converter — same day.
FAQ

Straight answers.

$99 per CNC machine, paid once. A three-machine shop pays $297, a ten-machine shop $990. That covers every feature, updates within your version, and support — there is no subscription, no server licence and no module to add later. Indian shops are invoiced in rupees with GST. The only thing not included is the serial-to-Ethernet converter a legacy RS-232 control needs, which is inexpensive third-party hardware.

Bring your shop floor's program transfer into 2026.

Get a Quote