ELECTRONIX · INDUSTRIAL AUTOMATION SERVICES

Everything your shop floor needs, from one engineering partner

New machines, test rigs and automation cells. PLC programs written, corrected and recovered. Free support when a machine stops. Drawings and manuals for machines that never had them. Live OEE and part traceability. CNC retrofits and DNC software. Designed in Coimbatore, by people who wire, program and commission what they design.

Get a free machine concept →WhatsApp us Call +91 94882 33115

Free

first PLC diagnosis, machine concept and DNC trial

1 day

reply time, usually sooner on WhatsApp

Multi-brand

Siemens · Omron · Delta · Mitsubishi · Allen Bradley · CODESYS

Source + docs

PLC and HMI source, drawings and manuals handed over

Something has stopped or is going wrong

Machines that run, but not well enough — or not at all today.

FREEFree PLC supportSend the fault; the first diagnosis and advice are free.Open →PLC program correctionHangs, false rejects, new sensors, lost programs, obsolete PLCs.Open →Machine documentationAs-built drawings, I/O and alarm lists, manuals for undocumented machines.Open →CNC retrofitFanuc, Siemens 828D or Fagor controls and drives on sound old machines.Open →

We need a machine built

A job too specific for a catalogue machine.

Special purpose machinesDesigned, built, programmed and commissioned around your part.Open →Leak testing machines1 to 6 stations, pressure decay, water dip, a verdict and reason per part.Open →Test rigs & end-of-line testersPressure, flow and analog testing for valves, regulators and assemblies.Open →Fixtures & automation cellsAssembly fixtures, pick-and-place, cobot load/unload, ESD work stations.Open →Machine visionPresence, orientation, code and defect checks wired to the PLC.Open →FREEFree machine conceptSend the part; get a layout, sequence, cycle time and budget range.Open →

Controls and electrical

The brains and wiring, for new machines and old ones.

PLC programming & HMI designSiemens, Omron, Delta, Mitsubishi, Allen Bradley, CODESYS; Weintek and WinCC.Open →Electrical panel designSchematics, wiring and cable schedules in EPLAN and AutoCAD Electrical.Open →

Data from the shop floor

Know what every machine is doing, and what every part went through.

IoT, OEE & traceabilityLive status, OEE per shift, and a record of every part, on your own network.Open →FREEDNC software for CNC machinesSend and drip-feed programs to Fanuc CNCs from one PC. Free full trial.Open →

Learn and plan

Free reading before you spend anything.

How to specify an SPMThe twelve things a machine builder needs from you.Open →Pressure decay leak testingTurning a leak rate in sccm into a pressure drop for your part.Open →CNC program transfer guidesFanuc RS-232 settings, alarms 085–087, drip-feed and shop networks.Open →

How working with us goes

Whatever the job, the first step costs nothing and the paid work is fixed before it starts.

STEP 01
Tell us the problem
WhatsApp, a call or the form below: the machine, the part, the fault or the goal. Photos and videos help most.
STEP 02
Free first answer
A diagnosis, a concept or a straight answer on whether it is worth doing — within one working day.
STEP 03
Fixed quotation
If there is paid work, a scope, a price and a schedule, agreed before anything starts.

Questions

Why use one partner for all of this?

Because the problems cross the boundaries. A machine that rejects good parts can be a sensor, a PLC timer, a recipe or a fixture; a traceability system needs the PLC programs changed to publish the right data. One team that does the mechanics, the panel, the PLC and the software can follow a problem wherever it leads, without three suppliers blaming each other.

Where are you, and where do you work?

In Coimbatore, Tamil Nadu. Machines are built and trialled here and installed at your plant; PLC support, program changes and documentation work can often be started remotely, with site visits where they are needed.

What does it cost to start?

Nothing for the first step: the PLC support diagnosis, the machine concept and a PLC program written from your sequence are free, and so is the DNC trial. Paid work is quoted at a fixed price for a defined scope before it starts.

How quickly do you reply?

Within one working day, usually sooner on WhatsApp or the phone.

Prefer a specific page? The special purpose machines overview has videos of machines running, and the DNC software pages cover program transfer for CNC shops.

Have a job that a machine should be doing?

Send the part and the target output. You get a concept, a sequence and a budget range back — free, and with no obligation to build it with us.

Get a free machine concept →WhatsApp us Call +91 94882 33115